HOME  >  CORPORATE  >  News

How to Install a Container House

2022-12-30
The container mobile house is similar to the building. The surrounding and partition wall foundation shall be leveled, and it is better to use reinforced concrete, which is relatively solid; Then erect columns, connect the skeleton with transverse beams, and connect the upper partition, exterior wall panels and door and window frames; Then lay the floor, install a layer upwards, and then install the roof truss and roof panel; Finally, install doors and windows and pull vertical support. There are also sanitary ware, hardware and so on. In fact, this is light steel structure, which is very similar to heavy steel structure workshop;

Technical description of container housr:

The modular container office room adopts the design concept and manufacturing process of the internationally popular container type mobile room, which can be used by a single container or combined with multiple containers (2-3 floors can be built). Its high thermal insulation performance creates a good office and living environment for field workers. The products are widely used in construction site office and residence, factory buildings, field operation sites, roof additional facilities and other fields.

1. The integrated crane series container house adopts light steel structure system, and the wall is covered with composite EPS insulation wallboard. All wallboards and accessories can be folded and packaged, and the installation is simple, which is suitable for large distance transportation and export sea transportation. Reference size: (mm) 6058 * 2438 * 2591 The size of the inlet cabinet at the outlet is relatively reduced (5850 * 2300 * 2700). The 40 'container can hold 6-8 sets of container rooms.

2. The roof, ground and circuit systems are completely prefabricated in the factory, making the on-site installation convenient and fast, and shortening the time interval from building to use.

3. The steel structure system makes the house have excellent ability to resist the wind speed of 120km/h; The lightweight structure makes the house show a good integrity when encountering an earthquake disaster that is 8 degrees stronger than the seismic fortification intensity.

4. The house can be transported as a whole or packed

5. The quantity of on-site foundation fabrication is small, and it can be used after being transported to the site.

6. The house can be recycled for 20 years without any construction waste.

7. The roof adopts structural waterproof design to enhance the air and water tightness of the house.

8. When the house leaves the factory, you can choose to add decorative accessories such as awning according to the actual application.

9. The company can be responsible for installation, guidance or training installation.

Relevant uses of container type activity room:

1. High end demand of construction site for temporary products, such as office, accommodation, meeting room, etc. of project manager;

2. The construction site is limited by the site and can only install box type modular housing products;

3. Field operation room; For example, mobile offices and dormitories for field exploration and construction;

4. Emergency room; Such as: military mobile command center, emergency mobile command center, disaster relief mobile command center, etc.

The integral hanging series of houses are highly adaptable to the environment, convenient for on-site installation, and can be used for a large number of temporary offices, accommodation, integral kitchens, bathrooms, and other purposes with medium and high grade requirements.


© 2005-2021 Shanghai Haicheng Special Steel Container Co., Ltd. All Rights Reserved

Sitemap | Glass Doors | Flatpack Container